33″ × 79″ (850mm × 2000mm) Retractable Banner Stand Hardware Only — 33 × 79 Inch Banner Stand Cassette, Telescoping Pole and Carry Case, No Graphic, Nationwide USA Delivery
The 33″ × 79″ (850mm × 2000mm) roller stand only is the hardware-only version of our most popular retractable banner stand — the aluminum cassette base, telescoping support pole, and carry case supplied without a printed graphic insert. This product exists for one straightforward reason: many buyers need stand hardware independently of graphic printing, and purchasing stand-only hardware at a lower unit cost makes more sense than ordering a complete stand-and-print package when the graphic is not needed.
850mm Banner Stand Hardware Only — Who Needs It
Stand-only hardware orders at the 33″ × 79″ (850mm × 2000mm) (approximately 33 × 79 inches) size are ordered for three primary reasons across our US customer base.
Replacing Damaged or Worn Hardware
If your existing 850mm retractable banner stand cassette or pole has been damaged — a broken retraction spring, a bent pole section, or a cracked cassette housing — and your printed graphic is still in good condition, ordering replacement retractable banner stand hardware lets you restore the complete display without reprinting the graphic. The stand-only unit accepts any compatible 850mm-width graphic and carries it exactly as the original hardware did. For a new printed graphic to pair with your replacement hardware, see our Replacement Graphics page.
Expanding an Existing Display Program
Businesses running multiple retractable banner stands across different locations — retail branches, touring event programs, or franchise networks — frequently need additional hardware cassettes to pair with graphics that are already produced and in circulation. Ordering 850mm banner stand hardware only provides the additional cassette and pole units needed to deploy existing graphics at new locations without the cost of reprinting graphics that are already current and correct.
Buying Hardware Ahead of Artwork Completion
Event timelines sometimes require hardware on-site before artwork is finalized. Ordering retractable banner stand only hardware at the 33″ × 79″ (850mm × 2000mm) size allows the physical stand to be positioned and configured at the venue while the graphic is still in design or production — the graphic installs into the cassette in minutes when it arrives.
Compatible Graphic Sizes for the 850mm Cassette
The 33″ × 79″ (850mm × 2000mm) stand cassette accepts graphics with a print width of 33″ (850mm) and a display height of 79″ (2000mm) — commonly referred to in the US market as a 33 × 79 or 33 × 80 retractable banner size. Additionally, the graphic includes a short insertion tail at the bottom — typically 50–100mm of unprinted material that feeds into the cassette slot and anchors under the spring mechanism. When ordering replacement graphics separately, confirm with our team that the graphic includes the correct insertion tail for the Printed Today cassette system.
For a full-color printed graphic in the correct 850mm format, see our Replacement Graphics page for graphic-only orders, or our Retractable Banner Printing page for a complete new stand-and-print package. For the full retractable banner stand range including all sizes and hardware grades, see our Retractable Banner Stands page.
Stand Only vs Complete Stand and Print — Which to Order
Table Note: If you are unsure which option is right for your specific situation — particularly if your existing cassette was supplied by a third-party manufacturer — contact our team before ordering. We advise on graphic compatibility and hardware matching before you commit to an order.
Stand Only Pricing and Delivery
The 33″ × 79″ (850mm × 2000mm) roller stand only starts from $38.36 per unit. Bulk pricing applies at higher quantities — proceed to checkout for the full quantity-based pricing schedule. All stand-only orders ship to all 50 United States via FedEx with full tracking. No zone surcharges apply. Express production options — 72-hour, 48-hour, and 24-hour next-day — are available for all delivery addresses nationwide.
Phone: +1 (929) 296-1279 — 8am–12am EST weekdays | 11am–7pm EST weekends
Live Chat: 8am–10pm EST daily — fastest for hardware compatibility questions
Email: [email protected]
Frequently Asked Questions — 850mm Roller Stand Only
What does “stand only” mean?
Stand only means the order contains the retractable banner stand hardware — the aluminum cassette base, telescoping support pole, and carry case — without a printed graphic insert. This is the correct order when you already have a compatible graphic to install, need spare hardware to expand an existing display program, or need to replace damaged hardware while keeping a graphic that is still current. For a complete package with hardware and printed graphic together, see our Retractable Banner Printing page.
What is the US size equivalent of an 33″ × 79″ (850mm × 2000mm) stand?
The 33″ × 79″ (850mm × 2000mm) retractable banner stand is approximately 33 inches wide and 79 inches tall — commonly referenced in the US as a 33 × 79 or 33 × 80 retractable banner size. It is the most widely used standard banner stand width in the US events, trade show, and retail display market. The 850mm cassette width is compatible with 850mm-width printed graphics from Printed Today and most third-party graphic suppliers producing at this standard size.
Will my existing graphic fit a Printed Today 850mm stand cassette?
If your existing graphic was produced to the standard 850mm width with a bottom insertion tail, it should be compatible with the Printed Today 850mm cassette. However, because insertion tail lengths and cassette slot tolerances vary slightly between hardware manufacturers, we recommend confirming compatibility with our team before ordering if your graphic was produced by a third party. Contact us with the graphic’s dimensions and we advise on fit before you place a stand-only order.
What if I also need a new graphic?
If you need both a new graphic and new hardware, a complete stand-and-print package from our Retractable Banner Printing page is more cost-effective than ordering them separately. If you need only a new graphic for hardware you already own, see our Replacement Graphics page for graphic-only ordering at the 850mm size.
Do stand-only orders ship to all 50 states?
Yes. We ship the 33″ × 79″ (850mm × 2000mm) roller stand only to all 50 United States via FedEx with full tracking at dispatch. No zone surcharges or remote-area delivery premiums apply. Express options — 72-hour, 48-hour, and 24-hour next-day — are available for all delivery addresses nationwide. For the full retractable banner stand range including all sizes and hardware grades, see our Retractable Banner Stands page.
